EDM
- AGIE AGIECUT CLASSIC V2 WIRE EDM AUTO THREAD 4-AXIS
WORK CAPABILITIES 9.8” x 13.75” x 10.0”
- MITSUBISHI DWC 90H WIRE EDM
WORK CAPABILITIES 9.8" x 11.8" x 7.1"
- MITSUBISHI DWC 90H1 WIRE
EDM 4-AXIS WORK CAPABILITIES 9.8" x 11.8" x 6.25"
CNC Lathes
- MORI SEIKI SL-3A C.N.C. LATHE
MAX. WORK PIECE DIA. 7.87" x 21.6" LONG / THRU SPINDLE DIA.= 1 5/8”
- MORI SEIKI SL-4 C.N.C. LATHE
MAX. WORK PIECE DIA. 13.8" x 23.6" LONG / THRU SPINDLE DIA.= 2 3/8”
- SUPERMAX YCM-TC-2 C.N.C. LATHE W / HYDROBAR BAR FEEDER 1 5/8” DIA.
MAX. WORK PIECE DIA. 9.8" x 18.7" LONG / THRU SPINDLE DIA.= 1 13/16”
CNC Mills
- HURCO VMX42 CNC MACHINING CENTER
MAX. TRAVEL X=42” Y=24” Z=24”
- HURCO VM1 CNC MACHINING CENTER
MAX. TRAVEL X=26” Y=14” Z=18”
- HAAS VF-4 CNC MACHINING CENTER (HAAS HA5C INDEXER)
MAX. TRAVEL X=50" Y=20" Z=20"
- HAAS VF-3SS CNC MACHINING CENTER (HAAS HR210T ROTARY TABLE)
MAX. TRAVEL X=40” Y=20” Z=25”
- MORI SEIKI MV 45/40 CNC MACHINING CENTER (HAAS HA5C INDEXER)
MAX. TRAVEL X=30" Y=18" Z=19"
- MORI SEIKI MV 35/40 CNC MACHINING CENTER (HAAS HA5C INDEXER)
MAX. TRAVEL X=30" Y=13.5" Z=13"
Hard Milling
Presses
- 19 EACH - RANGING FROM 10 TON to 550 TON / MAX BED 42” X 96”
Coordinate Measuring Machine
- MITUTOYO F905 3-D CMM
TRAVEL X=36.8" Y=22.2" Z=19.8” with Renishaw 3-D Probe
AND SPC (STATISTICAL PROGRESS CONTROL) SOFTWARE
Misc & Support Equipment
- AUTODESK INVENTOR 2010 SUITE
- MASTERCAM X4
- GAGETRAK 4 CALIBRATION SOFTWARE
- ENGINE LATHES - 30" SWING x 80" CENTER
- BRIDGEPORT MILLS - 11" x 58" WITH POWER FEED & DIGITAL READ OUT
- WITH POWER FEEDS AND DIGITAL READOUTS
- HORIZONTAL MILLS - MAX: 15” x 54” TRAVEL / 18” x 98” TABLE
- VERTICAL MILLS - MAX: 14” x 30” TRAVEL / 12” x 52” TABLE
- ARTER GRINDER - 32" DIA. MAX
- SURFACE GRINDER - 13.75" x 39" TABLE
- HEAT TREAT EQUIPMENT - 7" x 11" x 18" CAPACITY
- FORK LIFT & MATERIAL HANDLING – 12,000 LB CAPACITY MAX
;)
;)
;)
;)
;)
;)
;)
;)
;)